Page 1 of 1
elan wheel restoration
Posted:
Sun Apr 05, 2015 1:12 pmby el-saturn
...........................you sure can make one of these priceless (hr - wise) the one on the top got 16mm holes first, my home-made rings (3mm height); finally getting back to a lathe after 30yrs. my old F1 fabricator pal welded em in and many an hour later it looks like this, the one at the bottom is untouched except for the work - easter?s lovely this year - no silly walk with the y.k.w. sandy
Re: elan wheel restoration
Posted:
Sun Apr 05, 2015 1:18 pmby el-saturn
a close-up which i forgot happy easter everybody sandy 36 4982
Re: elan wheel restoration
Posted:
Sun Apr 05, 2015 1:44 pmby john.p.clegg
Sandy
I take it that you are talking about drive peg inserts ?? Been on my to do list for a while...did you use a spare hub as a jig ?
John
Re: elan wheel restoration
Posted:
Sun Apr 05, 2015 1:52 pmby el-saturn
yes, i did. you?ll need various grinders AND those PFERD rounded sandpaper "sanders" fitted to the rubber 6mm (shaft) "holder" PLUS t.b.h. a tiny bit ( 1,5 mm2 ) of polyester filler and lots of elbow grease!!!! cheers sandy