Page 1 of 1
Wolrace Slot Mag wheels
Posted:
Thu Mar 12, 2015 12:57 pm
by vernon.taylor
Salut
I picked up a set of these - not too expensive but probably because they're missing the 'ring collars' that the spinner tightens up against. Does anyone have dimensions of these so I can get a set made up ? Or can anyone tell me (probably in the archives somewhere) what the inside angle of such a collar should be, please ?
Merci et @+
Vernon
Re: Wolrace Slot Mag wheels
Posted:
Thu Mar 12, 2015 1:01 pm
by theelanman
Vernon
I pretty sure I have a spare set in my magical box of bits......
they were made when I had the wolfrace slot mags on.....
I'll see if I can find them if youre interested...
thanks
G
Re: Wolrace Slot Mag wheels
Posted:
Thu Mar 12, 2015 5:06 pm
by vernon.taylor
Yeah, more than, Gareth !
Re: Wolrace Slot Mag wheels
Posted:
Tue Mar 17, 2015 7:44 pm
by elj221c
Just a thought....
Did the Wolfrace wheels have rings?
Could it be that they are like the JAP wheels which don't require them?
Re: Wolrace Slot Mag wheels
Posted:
Tue Mar 17, 2015 7:54 pm
by el-saturn
.....................are the brand ones identical? ------------------------- if tey were i can make up a drawing (on a swiss ISIS!! drawing board - oldtimer stuff but within one tenth of a mm: measuring with proper instruments - only my mitutoya caliper is digital! just if i may help! sandy from the alps
Re: Wolrace Slot Mag wheels
Posted:
Wed Mar 18, 2015 8:09 am
by theelanman
elj221c wrote:Just a thought....
Did the Wolfrace wheels have rings?
Could it be that they are like the JAP wheels which don't require them?
yes they did have a ring.....
I had a set of the wolfrace wheels and had these....
the face of the wheel is flat and the nut has nothing to lock against
Re: Wolrace Slot Mag wheels
Posted:
Wed Mar 18, 2015 9:05 am
by elj221c
Noted, thanks.
I will see if I can remember that!