Removing the old damper 'guts' from a +2 rear strut
Posted: Tue Sep 30, 2014 8:45 pm
Thanks to all the archive posts I have read on the forum I have today managed to remove the rear strut and also succeeded in undoing the notorious threaded cap to the top of the insert tube. So now I have the insert? or original guts to remove from the tube. Do I just grab hold of the damper shaft in some way and pull or do I need to remove the cap like structure on the bottom of the strut tube and hammer the guts out from the bottom end. If I do have to remove the bottom 'cap' is there any approved method.
As always thanks in anticipation of any advice given.
As always thanks in anticipation of any advice given.