Lotus Elan

Air in the brake system

PostPost by: elan+2s » Thu Oct 23, 2014 2:21 pm

So I sign up again. After returning from holiday, I have bled the Bremsystem with a Eezibleed device. With a pressure of 1.6 bar was still much to the air bleed screws on the rear calipers. I then repeated the procedure again the next day. Actually arrived at the front left brake caliper still little air out.

The brake pedal now has a good pressure point. The braking effect during the test drive was ok.

Apparently it was not possible to bleed the brake system with a vacuum device to 100%.

I hope the problem is solved and I thank you for your lively discussion.

User avatar
First Gear
First Gear
Posts: 23
Joined: 19 Jun 2013
Location: Germany

Total Online:

Users browsing this forum: No registered users and 14 guests