servo tubing
Posted: Fri Jul 11, 2014 4:12 pmIs it acceptable to use rubber servo hose for the whole length from the servo to the engine manifold or should you use nylon pipe?
Lotus Elan and Lotus Elan Plus 2 Forums
The complete information source for Lotus Elan sportscars.
https://lotuselan.net/forums/
servo tubing
Page 1 of 1
Posted: Fri Jul 11, 2014 4:12 pmRe: servo tubing
Posted: Fri Jul 11, 2014 5:25 pmI find fuel hose makes a good vacuum hose as it's reinforced and doesn't collapse.
Re: servo tubing
Posted: Sun Jul 13, 2014 1:20 pmSalut
I used a short length of silicon hose from the metal pipe to the servo - about 20cm. Works fine, but I'm not sure I would use it for the whole length - it's quite supple so could possibly collapse. Reinforced-type fuel hose should be fine.
@+
Vernon
I used a short length of silicon hose from the metal pipe to the servo - about 20cm. Works fine, but I'm not sure I would use it for the whole length - it's quite supple so could possibly collapse. Reinforced-type fuel hose should be fine.
@+
Vernon