Page 1 of 1

Speed Bleeders

PostPosted: Wed Sep 05, 2012 11:43 am
by gino1
Hi Everyone,

I've been reading with interest on some of the sensible mods that have been carried out to Elans and am very interested in these "Speed Bleeders".

Does anyone have the correct code number of speed Bleeders to fit on the Elan ?

Is there also one for the Clutch slave cylinder too ?

Thanks
Gino

Re: Speed Bleeders

PostPosted: Wed Sep 05, 2012 1:11 pm
by collins_dan
It's been a couple of years, but according to the archives, the size I used for both brakes and clutch was SB3824L.
They are great. Easy one man job.
Dan

Re: Speed Bleeders

PostPosted: Wed Sep 05, 2012 1:54 pm
by gino1
Thanks Dan...already send a mail to them for a quote. :D

Gino

Re: Speed Bleeders

PostPosted: Wed Sep 05, 2012 3:17 pm
by prezoom
I use them on every old car I have, and have been for years. They make any sort of fluid bleeding a one man operation.

The 3824L translates to 3/8" diameter, 24 pitch thread, Long. The 3824 is a shorter version. The "L" works well with the front calipers.

Rob Walker
26-4889

Re: Speed Bleeders

PostPosted: Wed Sep 05, 2012 3:25 pm
by gino1
Thanks for your help chaps.
I've already ordered 5 of them delivered to Italy at $40.

Gino
Milano
Italy