Page 1 of 1

Steering Column Inner Shaft Required +2 (Now Sourced)

PostPosted: Mon May 21, 2012 4:55 pm
by jones+2
Hello,

Does anyone know where I can get a new or second hand non collapsible column. The previous owner has used a metric set screw with no shoulder in the universal joint / coupling which has subsequently made a mess of the splines on the shaft.

Cheers,
Mike

Re: Steering Column Inner Shaft Required +2

PostPosted: Mon May 21, 2012 5:45 pm
by Craig Elliott
I suspect you're going to have to keep an eye on the usual auction sites - unless the usual parts suppliers have recently started re-manufacturing them. It's also worth looking on the Triumph suppliers websites as I think both the early and late columns are Triumph sourced.

Good luck!

Re: Steering Column Inner Shaft Required +2

PostPosted: Mon May 21, 2012 5:54 pm
by nebogipfel
jones+2 wrote:Hello,

Does anyone know where I can get a new or second hand non collapsible column. The previous owner has used a metric set screw with no shoulder in the universal joint / coupling which has subsequently made a mess of the splines on the shaft.

Cheers,
Mike


Third item on the list looks like the one you need.....

http://www.rimmerbros.co.uk/Item--i-GRID005790

Re: Steering Column Inner Shaft Required +2

PostPosted: Mon May 21, 2012 6:20 pm
by jones+2
Thanks John,

I saw that earlier but doesn't look the same. The one off my car is the same thickness right until the last ft where it becomes slimmer to connect to the coupling.

Cheers,
Mike

Re: Steering Column Inner Shaft Required +2

PostPosted: Mon May 21, 2012 6:37 pm
by LotusElan+217
PM sent

Re: Steering Column Inner Shaft Required +2

PostPosted: Mon May 21, 2012 9:07 pm
by jones+2
Part now sourced.

Thanks to everyone who took the time to respond to my request.

Mike