Page 1 of 1
Wishbones
Posted:
Tue Jan 18, 2011 4:09 pmby Uboat
Hi,
I found out that the bolt holes in the front suspension wishbones are worn out, so I need to get replacement wishbones. Where can I find parts with original layout? I noticed that SJ offer tubular wishbones, but I would like to go the original route...
Cheers
/Ulf
Re: Wishbones
Posted:
Tue Jan 18, 2011 6:31 pmby john.p.clegg
Ulf
Just get yourself some thick washers of the right size and weld them in....
John
Re: Wishbones
Posted:
Sat Jan 22, 2011 9:06 amby Uboat
Thanks,
I will probably try this. However, I learnt that Sue Miller is about to offer wishbones that look like the originals, so this might also be a solution...
/ulf
Re: Wishbones
Posted:
Sun Jan 23, 2011 9:59 pmby smokey73
I have several front wishbone pieces, some of which don't have the holes elongated. One is cracked so it is probably not worth saving. I'll see if I can dig up some closeup pictures if you are interested.
Smokey
Re: Wishbones
Posted:
Mon Jan 24, 2011 9:25 pmby dpchamp87
I have one Sue Miller +2 wishbone new and unused. It has been yellow cad plated but could be painted or powder coated over the plating
pm me if interested
David