Re: Lotocone Mount Modification
Posted: Sun Nov 04, 2012 8:06 pm
Rohan's idea is the easiest as that is what I have done also, and to get at the cap screw hex heads
I made up a long drive bar.... I have the narrow wound springs, it is not a problem to access
hex cap screws from under neath.... don't create more problems that what you already have.
Ceejay
I made up a long drive bar.... I have the narrow wound springs, it is not a problem to access
hex cap screws from under neath.... don't create more problems that what you already have.
Ceejay