Page 1 of 1
Correct Tightning Of Knock On Wheels
Posted:
Wed May 25, 2005 8:01 pm
by Russ Moore
What is the correct way to tighten the knock on wheel spinners on a baby elan. And how many knocks does it take to get them tight usually
Re: Correct Tightning Of Knock On Wheels
Posted:
Thu May 26, 2005 8:30 am
by steveww
Keep whacking them sharply until they stop turning. You are aiming for 200ftlbs which is jolly tight.
Re: Correct Tightning Of Knock On Wheels
Posted:
Thu May 26, 2005 1:40 pm
by marcfuller
The Lotus Manual reads that the torque load for octagonal wheel nuts should be between 160-180 ft lbs. I would guess the load should be about the same for spinners. There is a tool available to drive spinners from a tool firm in the US. I don't know about the availablity of similar items in other countries.
Re: Correct Tightning Of Knock On Wheels
Posted:
Thu May 26, 2005 3:04 pm
by mark030358
Hi,
Do you know the name of the company, as I need one.
cheers
Mark
Re: Correct Tightning Of Knock On Wheels
Posted:
Thu May 26, 2005 3:29 pm
by marcfuller
Reportedly Baum Tools has the spinner drive.
<a href='http://www.baumtools.com/' target='_blank'>http://www.baumtools.com/</a>
The Lotus spinner drive is not their website, so you will need to contact them.
[email protected]