Page 1 of 1

Reasssembling Rear Brake Discs

PostPosted: Sat Apr 16, 2005 9:37 pm
by Jens
What is the easiest way to put brakediscs back on again. I have spent the entire evening out in the garage cursing the i**ot that took them of in the first place as it is one hell of a job to get them back on. When all my knuckles were bleeding I quit for today, now I am wondering how to do it in the least painfull way. Any suggestions? My car is not fitted with U-joints.

Thanks.

//Jens

Re: Reasssembling Rear Brake Discs

PostPosted: Sun Apr 17, 2005 9:35 am
by rgh0
Jens

I presume your problem is getting the disc over the 3 legged spider without it fouling on the lower A frame. With the strut at full droop this can be a problem, it helps to jack up the strut. Altenatively you can remove the A frame at the outer end and drop it down out of the way until you have the disc fitted.

Rohan