Lotus Elan

Securing fuel tank breather pipe to roof.

PostPost by: Bigbaldybloke » Tue Nov 17, 2020 4:59 pm

I used 5/16 fuel hose as that was the size of the fittings on the Newton breather valves I used. Needed a reducer down in size from the main tank breather pipes that go to the filler neck. Took the vent pipe up the C pillar then back down through the original hole and terminated it in the wheel arch as per the original.
738A1C87-08E6-416E-978F-B52AD7922F48.jpeg and
D34BB28F-58B9-4AEA-BE6D-8135D33C58D2.jpeg and
Change is inevitable, except from a vending machine!
Fourth Gear
Fourth Gear
Posts: 743
Joined: 16 May 2017
Location: Lincolnshire

Total Online:

Users browsing this forum: ericbushby, nickspeed, Seamus, TBG and 8 guests