Page 1 of 1
Stromberg Choke bracket Photo and diagram required...
Posted:
Sun Feb 24, 2013 5:57 pmby mark030358
I've misplaced the bracket and clip that holds the choke cable to the front carbs. I think its about 3/4" wide and maybe 2" long. CAn some one send me a photo and dimensions of said bracket as I think I'll have to make one.
I did post in the wanted section to see if anyone had a spare, but no response.
Thanks
Re: Stromberg Choke bracket Photo and diagram required...
Posted:
Sun Feb 24, 2013 7:57 pmby oldelanman
Is this what you are looking for..........
Re: Stromberg Choke bracket Photo and diagram required...
Posted:
Sun Feb 24, 2013 9:41 pmby RogerFrench
Ah-ha! I take it that this the bracket that holds the extra bit of cable you need to operate chokes on both carbs? My Europa only has operation on one carb at the moment but I have thought of changing it.
If so, many thanks Even though I didn't ask the question!
Re: Stromberg Choke bracket Photo and diagram required...
Posted:
Sun Feb 24, 2013 9:58 pmby mark030358
spot on thanks....
Re: Stromberg Choke bracket Photo and diagram required...
Posted:
Mon Feb 25, 2013 6:26 pmby oldelanman
Just to complete the picture, here's the bracket and clip from the rear carb.......
Re: Stromberg Choke bracket Photo and diagram required...
Posted:
Sat Mar 02, 2013 1:36 pmby mark030358
Well I have sourced a bracket, so now just a couple of things I need.
First, can someone post some good close up pictures of how the cable connects to both front and rear carbs please.
Second, is the choke cable a contiouous length from the dash through the front carb and finally to the rear one? If so do we have a length for this please. I have seen several posts that quote between 1.5 and 1.7 metres.
thanks in advance
Mark