fuel tank fuel feed bush
Posted: Fri Feb 08, 2013 10:18 am
Hi Folks
On an original fuel tank where the bolt that hold the fuel feed out banjo is very tight, as is the drain plug, what sort of torque would the tank take if I have to really "heave on it"
sure others have had this problem
thanks in advance 4 any advise
Bob
On an original fuel tank where the bolt that hold the fuel feed out banjo is very tight, as is the drain plug, what sort of torque would the tank take if I have to really "heave on it"
sure others have had this problem
thanks in advance 4 any advise
Bob