Page 2 of 2

Re: Help me to choose location of stickers on airbox

PostPosted: Sun Jan 27, 2013 4:44 pm
by Pistacchio sprint 72
This make sens. However, i doubt the sticker will stay stuck if bent to go over the lip/bulge...

But it is worth a try. Sue should provide a pic to show How to locale them!

Re: Help me to choose location of stickers on airbox

PostPosted: Sun Jan 27, 2013 6:08 pm
by Pastapesto
When you go to stick them on, first clean the area with a de-greasing agent such as white spirit or meths or degreaser. Then clean the area with a small amount of water with a little added detergent. This cleans away any residue from the de-greaser etc. Carefully position your sticker & gently rub it down with your finger or thumb. Now get a heat gun and carefully warm sticker until it is reasonably warm to the touch. Be carefully with the heat gun though, keep it about 6 inches (150mm) from sticker & gently warm it. Watch your fingers, the fibreglass air box & carbs etc, you only want it warmed to allow the glue to work properly. As long as you clean it properly & warm it as I said it should stay there and not peel off. Again, careful where you rest the heat gun as I have burnt/melted quite a few things in the past. A word of warning though, make sure your hands are clean just before you stick it on and be careful when wiping the sticker as any solvents present in the cloth/rag with wipe off the screen printed inks. Oil residue or petrol will also strip off the ink.

Susan Miller's ones for the carbs have an invisible clear laminate which protects the ink from being wiped off, all of the other ones out there as far as I know don't, so be careful. Take care either way.

Let me know if any of that was not clear, hope it helps.

Adam

Re: Help me to choose location of stickers on airbox

PostPosted: Sun Jan 27, 2013 6:25 pm
by alexblack13
Oh yes! Many thanks Adam.

You saved me a phone call And Cedric should be quite happy too....

AB...

Re: Help me to choose location of stickers on airbox

PostPosted: Mon Jan 28, 2013 2:07 pm
by alexblack13
Stuck my ones on today.. Trimmed the red and white a bit and it fits easily. Quick wipe with Brake cleaner and on they went no bother. I warmed them up by sitting on them for a while... :roll: No...? Oh well. I did sit my cup of tea on the sticker to flex it up a bit though...... Well.. I would have had to go get my heat gun! :lol: :lol: :lol:

It 'aint coming off easy.. :wink:

Pics .....

al' ... 8)

Re: Help me to choose location of stickers on airbox

PostPosted: Mon Jan 28, 2013 2:37 pm
by Pistacchio sprint 72
Lol Great and congrats!

I will order another from Sue! Not a big deal!

:mrgreen:

Re: Help me to choose location of stickers on airbox

PostPosted: Mon Jan 28, 2013 3:20 pm
by trw99
That's a grand looking job Alex, well done!

With the exception of the braided fuel lines, looks like it's just rolled off the line at Hethel!

Tim

Re: Help me to choose location of stickers on airbox

PostPosted: Sun Feb 10, 2013 12:31 pm
by Pistacchio sprint 72
Better Now?

Re: Help me to choose location of stickers on airbox

PostPosted: Sun Feb 10, 2013 3:22 pm
by andyelan
Hi Everyone

I can't say I've ever noticed the black sticker on an unrestored Elan but here they both are on my Europa
IMG_3992.JPG and

Re: Help me to choose location of stickers on airbox

PostPosted: Sun Feb 10, 2013 4:00 pm
by oldelanman
Anyone know what should go on a Stromberg (non-federal) airbox - I presume it's just the white one ?

Re: Help me to choose location of stickers on airbox

PostPosted: Mon Feb 11, 2013 4:26 pm
by vernon.taylor
Salut

Rdent has a black Stromberg sticker (and the white one).

Alex: where did you get your Lotus wing protector?

@+

Vernon

Re: Help me to choose location of stickers on airbox

PostPosted: Mon Feb 11, 2013 6:24 pm
by alexblack13
Hi Vernon.. Guys..

I bought it at the Club Lotus show at Donington a few years ago.

Hamilton Classics........... web site link (hopefully)!!

http://www.hamiltonclassic.co.uk/


Al'.......

Re: Help me to choose location of stickers on airbox

PostPosted: Tue Feb 12, 2013 4:09 pm
by oldelanman
oldelanman wrote:Anyone know what should go on a Stromberg (non-federal) airbox - I presume it's just the white one ?
vernon.taylor wrote:Rdent has a black Stromberg sticker (and the white one).


Thanks Vernon but that's the Federal sticker RD has - not applicable to the non-federal (UK) Stromberg engine. Did UK Stromberg cars have just the white "IMPORTANT" label about the flexible mountings or was there anything else ? The carburettor illustration in the workshop manual appears to show only the one but not sure how accurate the drawing is. My own car has never had any labels on the airbox - hence my question.

Re: Help me to choose location of stickers on airbox

PostPosted: Sat Feb 16, 2013 10:08 am
by oldelanman
oldelanman wrote:
oldelanman wrote:Anyone know what should go on a Stromberg (non-federal) airbox - I presume it's just the white one ?
vernon.taylor wrote:Rdent has a black Stromberg sticker (and the white one).


Thanks Vernon but that's the Federal sticker RD has - not applicable to the non-federal (UK) Stromberg engine. Did UK Stromberg cars have just the white "IMPORTANT" label about the flexible mountings or was there anything else ? The carburettor illustration in the workshop manual appears to show only the one but not sure how accurate the drawing is. My own car has never had any labels on the airbox - hence my question.

Bump.....Anyone ??

Re: Help me to choose location of stickers on airbox

PostPosted: Sat Feb 16, 2013 12:32 pm
by trw99
Roger

I've had a look through my old original Elan S4 road tests and they all appear to show just the one, white label.

Tim

Re: Help me to choose location of stickers on airbox

PostPosted: Sat Feb 16, 2013 12:49 pm
by oldelanman
trw99 wrote:Roger

I've had a look through my old original Elan S4 road tests and they all appear to show just the one, white label.

Tim


Many thanks for taking the time to do that Tim. I guess I'd better buy one now !