Fuel line thread sizes please
Posted: Wed Dec 06, 2006 12:03 pm
I've conceded it's impossible (with shell on) to thread the standard black plastic front to rear fuel pipe through correct top hole in backbone.
So after a suggestion on here I'm going to run a length of 5/16" or 1/4" Kunifer steel pipe through chassis and where it exits front and rear it will be connected to Aeroquip braided hose through to tank and AC fuel pump.
My local motorsport/fuel systems man wants to supply the correct bits obviously so I need the sizes of the inlet to the glass domed AC pump (I guess 1/2 unf) and the size and thread of the male (on the banjo) out of tank (this is smaller diameter and finer) Car is '68 +2 I've checked manual and can't see the sizes.
Thanks,
Kenny
So after a suggestion on here I'm going to run a length of 5/16" or 1/4" Kunifer steel pipe through chassis and where it exits front and rear it will be connected to Aeroquip braided hose through to tank and AC fuel pump.
My local motorsport/fuel systems man wants to supply the correct bits obviously so I need the sizes of the inlet to the glass domed AC pump (I guess 1/2 unf) and the size and thread of the male (on the banjo) out of tank (this is smaller diameter and finer) Car is '68 +2 I've checked manual and can't see the sizes.
Thanks,
Kenny