Weber 45 DCOE
2 posts
• Page 1 of 1
Post by: Famous Frank » Fri Jan 27, 2023 4:07 am
Wanted: A pair of decent 45 DCOE Weber Carbs. Contact Famous Frank at 678-596-1207
Thank you and all the best, Frank
Thank you and all the best, Frank
Famous Frank
67 Elan Coupe
66 Elan S2 SE
65 Elan S2
65 Elan 26R
69 S2 Europa
06 Elise
67 Barracuda
67 Elan Coupe
66 Elan S2 SE
65 Elan S2
65 Elan 26R
69 S2 Europa
06 Elise
67 Barracuda
-
Famous Frank - Fourth Gear
- Posts: 622
- Joined: 29 Apr 2004
- Location: Atlanta, Georgia USA
Post by: batfish » Mon Jan 30, 2023 11:31 am
Hi Frank
I have a pair of Italian made 45 DCOE 13s, refurbished a few years ago with new spindles and bearings but I have not run them since as they were my spare pair, they do not have air correctors, emulsion tubes, main jets or idle jets. I have the choke mechs if required blanking plates fitted at the moment
Send me a PM if interested, located in UK but must let you know they are not cheap,
Regards
Andy
I have a pair of Italian made 45 DCOE 13s, refurbished a few years ago with new spindles and bearings but I have not run them since as they were my spare pair, they do not have air correctors, emulsion tubes, main jets or idle jets. I have the choke mechs if required blanking plates fitted at the moment
Send me a PM if interested, located in UK but must let you know they are not cheap,
Regards
Andy
- Attachments
-
- batfish
- Third Gear
- Posts: 316
- Joined: 09 Oct 2003
- Location: Staffordshire
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: 65sunbeam and 0 guests
Site map
SitemapIndex
RSS Feed