Lotus Elan

Need a couple Cam Chain Tensiioners

PostPost by: Woodboater » Mon Jan 11, 2021 3:25 pm

I am looking for a couple of tensioners for two motors that I plan on building this year. Could also use a pair of cams and cam gears, and a couple new chains. I know I can buy them from wherever, but would like to find some parts that are laying about as I am not in a hurry. Could also use a set of 125E rods if someone has a cheap set laying around. I am located in Kansas.

Thanks in advance.
Blake Long
Elite CBU1122
First Gear
First Gear
Posts: 21
Joined: 17 Oct 2017
Location: Arkansas City Kansas

PostPost by: Mike Ostrov » Tue Jan 12, 2021 3:05 pm

Hi, Blake. I think I have some nice cam sets and gears. Will check tomorrow when the 6 foot 5 inch Elan S3 DHC lad is due to see if he can fit in an Elite. Cheers. Mike.
[email protected] or (5l0) 232-7764
Mike Ostrov
Second Gear
Second Gear
Posts: 130
Joined: 20 Sep 2003
Location: Richmond, CA

Total Online:

Users browsing this forum: No registered users and 1 guest