Page 3 of 3

Re: Red Cam Cover Paint

PostPosted: Mon Apr 06, 2020 6:31 pm
by bigvalvehead
This is my Sprint one I did yesterday.
Sanded after a quick bake in the oven.

And a few from earlier.
Dave

Re: Red Cam Cover Paint

PostPosted: Wed Apr 15, 2020 6:19 pm
by Bigbaldybloke
I had planned to paint mine myself using the VHT paint as above, but both cans I got sort of exploded around the nozzle and squirted all the paint out around the nozzle not through it. Luckily I was outside and no harm done. So, took it to the local powder coating place and they made a great job. I then just carefully removed the paint off the ribs and polished them. The finish they used is very similar to the crinkle finish used originally.