Exhast Hanger Locations

[chickenstock10k]

Can anyone tell me the location of the the original exhaust hangers on an Elan Plus 2.

I am in the middle of swapping out my federal emissions manifold for a header system for rdent and as part of that I am trying to eliminate some of the vibration I had been getting at idle. I think I determined at least one source of vibration - a more or less hard bolted hanger at the transmission.

I am inclined to just leave it off, since it doesn't look like it was originally there and there is a hanger 3/4 of the way back and then at the muffler again.

What were the original hanger points?

[el torro]

On 73 model in line back box it is front of box bracket and bobbins back of box flexible hanger on bracket,will try and post photos as I have entire system of car to get core plugs replaced

[SENC]

I was just reviewing a thread on this topic myself...

viewtopic.php?f=13&t=19089&start=

[TeeJay]

This information is found in the WIKI- COMING SOON as listed above

http://www.lotuselan.net/wiki/SA_-_Exhaust_%2B2

Hope it helps.

[Higs]

Hi

Although not shown on the parts diagram above, there is also the bracket that fixes to the gearbox:

http://www.lotuselan.net/forums/viewtopic.php?f=39&t=22929

Richard

[chickenstock10k]

As an update for folks. I was missing the piece that attaches to the gearbox. The previous owner had rigged something up in its place. Ordered a new piece from RDEnt and it is right as rain now.