Page 1 of 1

Heater Hose Lenght and ID Size Elan S4

PostPosted: Fri Mar 01, 2019 1:09 am
by bdea
Hi, could anyone give me:
Correct lenghts of heater hose on the supply and return line from motor to heater core.
If i remember correctly 30 years ago, 5' total lenght was alittle short!

TIA

Re: Heater Hose Lenght and ID Size Elan S4

PostPosted: Fri Mar 01, 2019 11:02 am
by pharriso
Just replaced both of mine, it's 1/2" hose & 5 feet will do it!

Re: Heater Hose Lenght and ID Size Elan S4

PostPosted: Fri Mar 01, 2019 4:09 pm
by USA64
pharriso wrote:Just replaced both of mine, it's 1/2" hose & 5 feet will do it!


May I ask how you dealt with the right angle hose to heater connection and are the heater connection close to the firewall or the dash?

Re: Heater Hose Lenght and ID Size Elan S4

PostPosted: Fri Mar 01, 2019 4:18 pm
by pharriso
USA64 wrote:
pharriso wrote:Just replaced both of mine, it's 1/2" hose & 5 feet will do it!


May I ask how you dealt with the right angle hose to heater connection and are the heater connection close to the firewall or the dash?


No issue, just a nice big bend... there's plenty of space.
img_0305.jpg and

Re: Heater Hose Lenght and ID Size Elan S4

PostPosted: Fri Mar 01, 2019 6:56 pm
by USA64
Usefull picture, thanks!

Re: Heater Hose Lenght and ID Size Elan S4

PostPosted: Fri Apr 05, 2019 5:38 pm
by bdea
Update FYI:

Total length of heater hose needed: 5 feet (after stuffing extra hose length under dash, I had 1" extra leftover)
ID: 1/2"


Inlet hose length (right side): Water Pump Housing to heater core: >36",
-can be longer if you allow extra length under dash, I noted hose end to be damaged due to age at the housing.
-cutoff damaged end (after 20 yrs) and use again!

Return hose length (left side): Thermostat housing to heater core: >19"
- As above

Picture below are the heater hoses I removed.

The extra pieces of hose:
- to the right on the top (right ) hose was the 2" I took off to pull the hose through the grommet in the firewall.
- to the right on the bottom (left ) hose was the 1" left over from the 5' hose (not showing the 2" cut off piece)