Twin Cam gasket source (cam chain valley)
3 posts
• Page 1 of 1
Several years ago, I happened across a different gasket material for the rectangular cam chain gasket that goes just in front of the head gasket. Much different from the regular ones made of cork, this was a "gasket type material" and was about .125 thick. Don't squish out when compressed.............
Do they exist ?? Sources ??
Mike in Sacramento
Do they exist ?? Sources ??
Mike in Sacramento
- bluesbrother30
- Second Gear
- Posts: 205
- Joined: 28 Oct 2003
bluesbrother30 wrote:Several years ago, I happened across a different gasket material for the rectangular cam chain gasket that goes just in front of the head gasket. Much different from the regular ones made of cork, this was a "gasket type material" and was about .125 thick. Don't squish out when compressed.............
Do they exist ?? Sources ??
Mike in Sacramento
Would it be something like a reusable Cometic gasket (nitrile based I understand) ? not on Cometic site yet but available from a variety of sources, including this one (half as thin as the one you mention though) :
http://www.burtonpower.com/cometic-cam- ... 19com.html
S4SE 36/8198
-
nmauduit - Coveted Fifth Gear
- Posts: 2037
- Joined: 02 Sep 2013
Hi
I think he means the cork gasket on the chain case top, not the cam cover.
I think he means the cork gasket on the chain case top, not the cam cover.
John
+2s130 1971
+2s130 1971
-
Hawksfield - Fourth Gear
- Posts: 600
- Joined: 14 Jul 2004
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 22 guests