Page 1 of 1

Box of bits from QED

PostPosted: Tue Jun 14, 2016 12:26 pm
by zuvendis
Take a look in the box.

Guess what I'll be doing for the foreseeable future? :roll:

Re: Box of bits from QED

PostPosted: Tue Jun 14, 2016 2:01 pm
by nmauduit
buying two cases of beer?

in case you plan to do it with the engine on that is...

Re: Box of bits from QED

PostPosted: Tue Jun 14, 2016 2:04 pm
by zuvendis
Already half way through the first case at the very prospect. :D

Re: Box of bits from QED

PostPosted: Tue Jun 14, 2016 4:00 pm
by pereirac
Engine in our out??

Re: Box of bits from QED

PostPosted: Tue Jun 14, 2016 4:29 pm
by zuvendis
Bonnet off, radiator out, head off, timing cover off, but block still bolted in place.

It's a long story... :roll:

Re: Box of bits from QED

PostPosted: Tue Jun 14, 2016 6:14 pm
by Rob P
sounds like two crates of beer might not be enough ;-)

Re: Box of bits from QED

PostPosted: Wed Jun 15, 2016 7:59 pm
by Hawksfield
Hi

Sump off to ensure no leaks, was it for the water pump?

Good luck

Re: Box of bits from QED

PostPosted: Wed Jun 15, 2016 8:45 pm
by zuvendis
Yes, and yes. :)

Re: Box of bits from QED

PostPosted: Thu Jun 16, 2016 5:55 am
by john.p.clegg
Mark S

I think you missed something...

deepheat.jpg
deepheat.jpg (36.42 KiB) Viewed 902 times



John :wink:

Re: Box of bits from QED

PostPosted: Thu Jun 16, 2016 8:43 am
by zuvendis
You've been speaking to my physio, haven't you John? :lol:

Re: Box of bits from QED

PostPosted: Thu Jun 16, 2016 9:38 am
by john.p.clegg
I don't know what age or condition you're in but hours bent over the wings will take their toll on your back and knees,it's not much more trouble to hoist the engine out and work on it in comfort..

John :wink:

62 with a bad back and knees.

Re: Box of bits from QED

PostPosted: Thu Jun 16, 2016 6:18 pm
by zuvendis
Don't have access to an engine lift at the moment. I suppose I should buy my own, but then it's another lump of metal to take up space in the garage. :roll: