Electric water pump

PostPost by: triumphelan » Fri Oct 21, 2005 6:36 am

I`ve been running atooth belt set up from Vulcan for 5years ,the belt is so slack I can remove it without slackening the altenator.
Regards John 1969S4DHC
triumphelan
Third Gear
Third Gear
 
Posts: 291
Joined: 04 Jul 2005

PostPost by: rgh0 » Fri Oct 21, 2005 11:29 am

If you fit an electric pump in the bottom hose it should be easy enough to relocate the heater return hose from the suction of the original pump to the suction of the electric pump then it will work as it did originally.

Rohan
User avatar
rgh0
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 8815
Joined: 22 Sep 2003

PostPost by: builder618 » Sat Oct 29, 2005 1:42 am

The location of the heater hoses should be able to be placed to keep heater fonction. You will not need a pully giving less drag on the engine.
The electric I posted awhile ago from "stewart auto" looked great, going in my old rig before I finish it. If you are a purest, just keep your wrenches handy, I would rather ride.
builder618
First Gear
First Gear
 
Posts: 18
Joined: 10 Oct 2004
Previous

Total Online:

Users browsing this forum: alan.barker, Andy8421 and 18 guests