Headlamp vacuum loss
4 posts
• Page 1 of 1
Hi there,
I've changed the headlamp vacuum pipes and checked the unions and non return valve on my 1973 +2 but the lamps still pop up minutes after switching off. All that's left is the vacuum pod and the solenoid. Is there a way of telling which is at fault without buying both items new and has anyone managed to change the seal in their solenoid? (mine is a replacement). Grateful for any help,
Simon
I've changed the headlamp vacuum pipes and checked the unions and non return valve on my 1973 +2 but the lamps still pop up minutes after switching off. All that's left is the vacuum pod and the solenoid. Is there a way of telling which is at fault without buying both items new and has anyone managed to change the seal in their solenoid? (mine is a replacement). Grateful for any help,
Simon
-
Si_130/5 - Second Gear
- Posts: 222
- Joined: 27 Jan 2005
Hi Si
Have you tried clipping the tube that leads from the pod (with the headlights down)?
Berni
Have you tried clipping the tube that leads from the pod (with the headlights down)?
Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
-
berni29 - Fourth Gear
- Posts: 832
- Joined: 10 Mar 2004
- Location: Beckenham Kent
Simon,
There's a write-up about the headlight vac system on the Golden Gate Lotus Club site. http://www.gglotus.org/ggtech/ggtech.htm
Click on "Elan/+2" and look for the article on the Headlamp System.
Cheers,
Kiyoshi
There's a write-up about the headlight vac system on the Golden Gate Lotus Club site. http://www.gglotus.org/ggtech/ggtech.htm
Click on "Elan/+2" and look for the article on the Headlamp System.
Cheers,
Kiyoshi
-
khamai - Third Gear
- Posts: 272
- Joined: 20 Oct 2003
- Location: NorCal
Thanks for your help guys. It's new vacuum solenoid time.
Simon
Simon
-
Si_130/5 - Second Gear
- Posts: 222
- Joined: 27 Jan 2005
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: marklowe, Max.Hurst and 16 guests