Lotus Elan

Heater rebuild

PostPost by: john.p.clegg » Tue May 24, 2016 12:23 pm

Just align the centre of the movement half way across the arc tangential to the cable guides with the flaps central...

John :wink:
User avatar
john.p.clegg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5691
Joined: 21 Sep 2003
Location: Manchester

PostPost by: Robbie693 » Wed May 25, 2016 10:51 am

Useful to know John. I was more referring to lining up the splines on the levers with those on the shafts; they are very fine and try as I might I couldn't feel a positive engagement before pushing them on. In the end I got frustrated and just tapped the levers on where they should be thinking that the material of the levers is fairly soft and they would either cut a new engagement of self align... whatever happened it worked ok although I did cross-drill one and put a split pin in but can't remember why exactly :oops:

Others may be more scientific!

Robbie
User avatar
Robbie693
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1615
Joined: 08 Oct 2003
Location: UK

PostPost by: el-saturn » Mon May 11, 2020 5:43 am

this is t.g. ONE component which is much simpler in my s3 elan - no foam anywheres.... it must be much larger too. sandy
el-saturn
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1421
Joined: 27 Jun 2012
Location: switzerland
Previous

Total Online:

Users browsing this forum: No registered users and 10 guests