Page 1 of 1
Thermostat housing filler
Posted:
Mon Feb 26, 2007 6:06 pm
by sulzeruk
Hi all, just wondering where I can get a thermostat housing that has the filler in it as I can't seem to get the top hose full at all.
Driving me insane and I don't want to cook the motor (again!)
Passed its MOT today and then the front brakes started to seize so it looks like a full brake strip before I can enjoy it!
Al COwan
Re: Thermostat housing filler
Posted:
Mon Feb 26, 2007 6:11 pm
by tdafforn
You can get them from Burton Power, but they have issues with the direction of the pipe fitting.
Cheers
Tim
Re: Thermostat housing filler
Posted:
Mon Feb 26, 2007 6:14 pm
by stuartgb100
Sorry the brakes seized, but surely a pleasant bonus to get it through the MOT first?
Regards,
Stuart.
Re: Thermostat housing filler
Posted:
Mon Feb 26, 2007 8:27 pm
by sulzeruk
Hi all, thanks for the speedy response! Had a quick look and discovered that the small release hole in the brake masterclyinder was gummed up and blocked! Have a list of parts to order tomorrow, new disks and pads all round, Goodridge brake hoses, caliper rebuild kits, etc! Had my first real look underneath at the MOT station and was pleasntly surprised how clean it was under there. Had nice drips from the diff and gearbox underneath which will need to be addressed! The rear donuts are absolutely scrap after sitting for so long, roll on the CV conversion!
Al Cowan
Re: Thermostat housing filler
Posted:
Tue Feb 27, 2007 5:56 pm
by mrob
Re: Thermostat housing filler
Posted:
Sun Mar 04, 2007 12:30 pm
by cliveyboy
The link above to the thermostat picture is a bit old and just shows a prototype housing.
For the finished item check my website below and some pictures of one fitted to my Elan
Re: Thermostat housing filler
Posted:
Sat Oct 05, 2019 10:39 am
by coolexperts
Hello all,
The news is good!!!!
Check this out from Coolex (click on links)
http://www.coolexperts.co.uk/new/wp-con ... 1634642149http://www.coolexperts.co.uk/new/wp-con ... =500820317See the post yesterday with cost details.
Steve (AKA Mr Cool
)
Re: Thermostat housing filler
Posted:
Sat Oct 05, 2019 1:29 pm
by JonB
You don't need to resurrect old threads with adverts Steve.