Ignition Light
2 posts
• Page 1 of 1
Post by: twincamman » Mon Sep 13, 2004 11:53 am
now that the fire trucks have left my garage and the electrical fire damage repaired -----can any one tell me how to wire the ignition light to the field wire from the alternater so the light goes out when i start the car? ed law :huh:
dont close your eyes --you will miss the crash
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
-
twincamman - Coveted Fifth Gear
- Posts: 3175
- Joined: 02 Oct 2003
Post by: john.p.clegg » Mon Sep 13, 2004 12:39 pm
Ed
it's quite simple really,find a wire that is live with the ignition switched on(on the ignition switch,coil etc.),run that via the ignition light to the small connector on the alternator,done.
As the output of the alternator rises to the same level as the battery the light will go out.
John
it's quite simple really,find a wire that is live with the ignition switched on(on the ignition switch,coil etc.),run that via the ignition light to the small connector on the alternator,done.
As the output of the alternator rises to the same level as the battery the light will go out.
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 5745
- Joined: 21 Sep 2003
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 27 guests
Site map
SitemapIndex
RSS Feed