Ignition switch rotates when I turn the key.

PostPost by: Lotus 50 » Mon Aug 17, 2020 1:38 am

This started last year after an electrical repair. A different shop was unable to fix it this year. Ideas?
Lotus 50
Second Gear
Second Gear
 
Posts: 122
Joined: 07 Jan 2012

PostPost by: wotsisname » Mon Aug 17, 2020 7:23 am

Not sure what car or where it is positioned in your case.
The early +2 has the ignition switch in the dash panel. There is a small metal plate, with a D shaped cut out, behind the dash. This has a single screw through it to prevent switch rotation. Described as a lock plate, but not shown, in the parts manual (BH, #10).. if yours is a similar car.
Adrian
1968 Elan plus 2 - project
2007 Elise S2 [modified with a Hethel 70th sticker (yellow)]
2000 Elise S1 - Sold
wotsisname
Third Gear
Third Gear
 
Posts: 487
Joined: 24 Jun 2015

PostPost by: RichardHawkins » Mon Aug 17, 2020 6:33 pm

My car is a1968 S4 Elan. The original dash board had a D shaped hole for the ignition switch. The replacement dash also has a D shaped hole, but the wrong size. I made a thin steel plate with a D shaped hole that fits the ignition switch, and screwed it to the back of the dash.

Hope this helps,

Richard Hawkins
RichardHawkins
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1206
Joined: 05 Jul 2008

PostPost by: The Veg » Mon Aug 17, 2020 11:21 pm

wotsisname wrote:Not sure what car or where it is positioned in your case.
The early +2 has the ignition switch in the dash panel. There is a small metal plate, with a D shaped cut out, behind the dash. This has a single screw through it to prevent switch rotation. Described as a lock plate, but not shown, in the parts manual (BH, #10).. if yours is a similar car.
Adrian


Well now that's interesting. Someone must have lost that plate as mine didn't have it. What it did have is a couple of 'washers' made of what appears to be sandpaper, of maybe 100-120 grit. It does the trick, since only a very small amount of turning force on the key is required to engage the start-contacts.
1970 Elan Plus 2 (not S) 50/2036
2012 BMW R1200GS
"It just wouldn't be a complete day if I didn't forget something!" -Me
User avatar
The Veg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2329
Joined: 16 Nov 2015

PostPost by: wotsisname » Tue Aug 18, 2020 7:10 am

I think those washers are for the door locks on the +2S.. I guess a similar situation arises.. luckily my lock is built into the handle.
1968 Elan plus 2 - project
2007 Elise S2 [modified with a Hethel 70th sticker (yellow)]
2000 Elise S1 - Sold
wotsisname
Third Gear
Third Gear
 
Posts: 487
Joined: 24 Jun 2015

PostPost by: 69S4 » Tue Aug 18, 2020 7:57 am

Yes, I've got the sandpaper washers as well. Don't know if they're OE on my S4 but they work well enough.
Stuart Holding
Thame UK / Alpe D'Huez France
69 S4 FHC
Honda GoldWing 1800
Honda CBX1000
Kawasaki H1 500
Yamaha XS2
69S4
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1347
Joined: 23 Sep 2004

PostPost by: billwill » Thu Aug 20, 2020 11:57 am

You could, of course, make a wooden slice off a circle to make the D shape and then glue that slice into your round hole.
Bill Williams

36/6725 S3 Coupe OGU108E Yellow over Black.
billwill
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 5060
Joined: 19 Apr 2008

PostPost by: The Veg » Thu Aug 20, 2020 12:07 pm

billwill wrote:You could, of course, make a wooden slice off a circle to make the D shape and then glue that slice into your round hole.


That's a really great idea. I started to wonder why I didn't think of that, but then I *am* a dumbass- just ask my brother! :mrgreen:
1970 Elan Plus 2 (not S) 50/2036
2012 BMW R1200GS
"It just wouldn't be a complete day if I didn't forget something!" -Me
User avatar
The Veg
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2329
Joined: 16 Nov 2015

PostPost by: tonyabacus » Thu Aug 20, 2020 4:39 pm

I guess the problem is getting to the back of the switch to screw anything to the rear of the dash whilst its all insitu.

You might try making a plastic washer with a d shape cut out that will fit between the dash and the switch at the rear. Once made apply some adhesive to the face of the washer which attaching to the dash and fit it onto the switch.

Replace the switch in the correct position behind the dash and tighten it up and then wait for the adhesive to set, final tweaking to tighten can then be done.
Tony
tonyabacus
Third Gear
Third Gear
 
Posts: 285
Joined: 16 Sep 2003

PostPost by: Bigbaldybloke » Tue Aug 25, 2020 12:12 am

Mine has a small square plate with a D shaped hole in it and the four corners of the plate bent 90 degrees to form 4 small spikes that dig into the wood of the rear of the dash and stop it moving.
Attachments
A6DBC557-8D78-4D8C-8097-CB40B3A2C8D2.jpeg and
The corners are about visible!
Change is inevitable, except from a vending machine!
Bigbaldybloke
Fourth Gear
Fourth Gear
 
Posts: 894
Joined: 16 May 2017

Total Online:

Users browsing this forum: No registered users and 26 guests