Create a flick wipe?
Posted: Sun Aug 16, 2020 1:08 pm
Toad's headlamp dip switch has a built in flasher function. This was disconnected as some point, presumably 'cos its a bit useless.
Could I use this to create a flick wipe? Brown wire from the switch (permanent live) to the existing wiper switch?
Contacts 4/5 are the return to park circuit? Therefore 2 or 3 would be the one to use?
See any problems with this?
Could I use this to create a flick wipe? Brown wire from the switch (permanent live) to the existing wiper switch?
Contacts 4/5 are the return to park circuit? Therefore 2 or 3 would be the one to use?
See any problems with this?