ONLY 130S FLASH
Posted: Thu Jun 18, 2020 11:09 am
When i had my last 1973 +2S130 of course the Head Lamps were the Failsafe ones.
One Vacuum Cylinder and Head Lamps held down by Vacuum.
A reminder this is ONLY for +2S130 models.
If you put the Head Lamp Dip Switch to High Beam(only not dipped) and pull the Dip Switch back it will operate the Vacuum Solenoid. This will raise the Head Lamps which is very handy with your hands still on the Steering Wheel.
I know i know you can pull the Light Switch in the bottom of the Dashboard.
But this is a second method to raise the Head Lamps and flash (+2S130 ONLY) which many owners do not know.
Alan
One Vacuum Cylinder and Head Lamps held down by Vacuum.
A reminder this is ONLY for +2S130 models.
If you put the Head Lamp Dip Switch to High Beam(only not dipped) and pull the Dip Switch back it will operate the Vacuum Solenoid. This will raise the Head Lamps which is very handy with your hands still on the Steering Wheel.
I know i know you can pull the Light Switch in the bottom of the Dashboard.
But this is a second method to raise the Head Lamps and flash (+2S130 ONLY) which many owners do not know.
Alan