Page 1 of 1
Voltage Stabiliser Connections
Posted:
Wed Feb 25, 2004 10:18 pm
by steveww
So as I am re-wiring my S4 SE and I have now sorted out the ignition switch thanks to your great help.
One more question - Any idea which wire goes on to which pin on the little voltage stabiliser bolted on to the back of the tacho?
Re: Voltage Stabiliser Connections
Posted:
Thu Feb 26, 2004 10:17 am
by trw99
There is an interesting voltage stabiliser upgrade at <a href='http://www.rustfreeroadsters.com/BODYelectronicvoltagestab.htm' target='_blank'>http://www.rustfreeroadsters.com/BODYelect...voltagestab.htm</a>
I have not used it but it might be helpful
Re: Voltage Stabiliser Connections
Posted:
Thu Feb 26, 2004 5:40 pm
by steveww
Very useful thanks
Really need on of the UK suppliers to start stocking that little gizmo.
Re: Voltage Stabiliser Connections
Posted:
Fri Feb 27, 2004 1:59 pm
by fatboyoz
Have tried half a dozen times to order one of these voltage stabilisers. Unfortunately have received no reply what so ever. Pity, looks and sounds like a great little gizmo.
Colin.
Re: Voltage Stabiliser Connections
Posted:
Fri Feb 27, 2004 5:21 pm
by steveww
Well never one to give up that easy, I have popped off an email to see if they know where Europe is.
Would be interesting to find out who manufactures that little gizmo and see if I could buy in bulk direct and may be see if Club Lotus or similar would be interested in stocking them.