Page 1 of 1
Install Petronix distributor
Posted:
Sat May 12, 2018 7:58 pmby collins_dan
My shop manual is in a safe place. I just am not sure right now where that is. Can someone scan the pages for removing the distributor. Head doesn?t need to come off, does it. The space is so tight it?s hard to tell. Thanks, Dan
Re: Install Petronix distributor
Posted:
Sat May 12, 2018 8:19 pmby richardcox_lotus
Dan, the head (and carbs) can stay in place. Just don?t turn the engine until after you re-install it.
Re: Install Petronix distributor
Posted:
Sat May 12, 2018 11:56 pmby rgh0
Just remove the dizzy cap and rotor and release the clamping bolt and you should be able to pull it up and out with it just clearing the underneath of the carbs.
cheers
Rohan
Re: Install Petronix distributor
Posted:
Sun May 13, 2018 4:08 pmby collins_dan
Ok, thanks. Dan