Page 1 of 1

Paul Matty headlight solenoid

PostPosted: Fri Nov 04, 2016 7:06 pm
by JR44
Hi anybody fitted a new headlight solenoid valve to a +2 any pictures of fitment would be magic please .. got it but no instructions

Re: Paul Matty headlight solenoid

PostPosted: Sat Nov 05, 2016 3:13 pm
by prezoom
Mine was located on the left side of the flange between the radiator and the inner body, on the front side. Coming to grips with the high technical nature of the Plush2 after working on the S2.

Re: Paul Matty headlight solenoid

PostPosted: Sat Nov 05, 2016 3:56 pm
by Maulden7
If you have any doubt, just ring them. If the parts guys can't advise, they are normally quite happy to get somebody from the workshop. I have done this a couple of times & had my questions answered very quickly & clearly..

Re: Paul Matty headlight solenoid

PostPosted: Mon Nov 07, 2016 3:24 pm
by pharriso
I have this picture, maybe you can figure out which way is up?
plus2_130_5_headlightvacuumsolenoid.jpg and


The relay is the horn relay...

Re: Paul Matty headlight solenoid

PostPosted: Tue Nov 08, 2016 3:02 pm
by JR44
Haha thats the photo from my car, spoke to paul mattys they recond the connection coming out the end should point to the front of the car but weren't sure