Plus 2 headlight vacuum
4 posts
• Page 1 of 1
hi, bit of help needed.
Had the engine out the car for partial rebuild and headlights were operating fine. On reassembly headlights now go down when accelerator lifted but rise on acceleration. Carefully marked all pipes etc before dismantle and reconnected in correct positions. Do I need to have headlight switch pulled out so system fills or am I barking up the wrong tree. Cap and spring come off servo with minimal effort if knocked, does this have any effect?
Had the engine out the car for partial rebuild and headlights were operating fine. On reassembly headlights now go down when accelerator lifted but rise on acceleration. Carefully marked all pipes etc before dismantle and reconnected in correct positions. Do I need to have headlight switch pulled out so system fills or am I barking up the wrong tree. Cap and spring come off servo with minimal effort if knocked, does this have any effect?
- Speedster
- First Gear
- Posts: 23
- Joined: 02 Aug 2011
Is the one way valve still in circuit on no 1 cylinder inlet tract ?
Ian
Ian
- elansprint
- Fourth Gear
- Posts: 525
- Joined: 12 Sep 2003
4 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 16 guests