Page 2 of 2

Re: Aldon ignitor and an RV1 tach

PostPosted: Fri Aug 10, 2012 6:41 pm
by bob_rich
Hi

looks like an RV1 4 terminals ground for the case +12V input and two leads for the current loop
gold colour is probably what the rebuilder did

best of luck

Bob

Re: Aldon ignitor and an RV1 tach

PostPosted: Sun Aug 12, 2012 5:48 pm
by ricarbo
Yes that's the case of a later version RV1, with the loop internal. i attach 2 pics of the early type with the external loop, for comparison.
RV1 017.jpg and
RV1 016.jpg and

As I'm sure you know, the current has to flow in the correct direction through the loop for the tacho to work.
Richard