Page 1 of 1
ELECTRONIC IGNITION ON ELAN TWIN CAM
Posted:
Tue Jun 14, 2011 9:34 amby VDB 50K
Have converted my Dizzy with Aldon's electronic ignition kit.Can anyone with experience,of the conversion,advise me what plug to use and the gapping....Sprint engine...cheers Bill.west yorks.
Re: ELECTRONIC IGNITION ON ELAN TWIN CAM
Posted:
Tue Jun 14, 2011 11:41 amby bcmc33
VDB 50K wrote:Have converted my Dizzy with Aldon's electronic ignition kit.Can anyone with experience,of the conversion,advise me what plug to use and the gapping....Sprint engine...cheers Bill.west yorks.
Talk to Alan at Aldon.
Re: ELECTRONIC IGNITION ON ELAN TWIN CAM
Posted:
Tue Jun 14, 2011 8:44 pmby andyelan
Hi Bill
I would have thought the plugs should be the same as standard ie BP7ES or BP6ES
Andy
Re: ELECTRONIC IGNITION ON ELAN TWIN CAM
Posted:
Tue Jun 14, 2011 8:56 pmby alexblack13
I opened the gaps on mine to 030" ...This is with Magnetronic and Bosch 'Blue' coil.. You want to see (and hear!) the spark from that set up.
Don't get hit by it or you will not need any rockets to get to the moon. And if you do? ... Remember our postcards!
Re: ELECTRONIC IGNITION ON ELAN TWIN CAM
Posted:
Tue Jun 14, 2011 10:07 pmby bcmc33
andyelan wrote:Hi Bill
I would have thought the plugs should be the same as standard ie BP7ES or BP6ES
Andy
Electronic ignition, Bill - so the plugs will be BPR7ES or BPR6ES. But then Aldon will tell you that.
The plug leads should be resister type, also.
Re: ELECTRONIC IGNITION ON ELAN TWIN CAM
Posted:
Thu Jun 16, 2011 4:09 pmby Jeff@Jae
BP6ES, resistor lead set, Lucas Sports/Pertonix/Bosch blue coil and gaps work great at .030'-.032".
Re: ELECTRONIC IGNITION ON ELAN TWIN CAM
Posted:
Fri Jun 17, 2011 3:39 pmby pauljones
I run with Bosche Super 4's, Not sure how they fit in with the hot/cold numbers, but they dont foul up no matter how I drive.
Paul
Re: ELECTRONIC IGNITION ON ELAN TWIN CAM
Posted:
Fri Jun 17, 2011 7:43 pmby nebogipfel
andyelan wrote:Hi Bill
I would have thought the plugs should be the same as standard ie BP7ES or BP6ES
Andy
Work fine in mine .....Aldon Ignitor, standard coil and standard gaps
