Page 1 of 2

alternative seats that fit?

PostPosted: Sun Jun 12, 2011 1:28 pm
by mini64
i was wondering if we could start a new list on seats people have found that fit. I've searched the archieve but it looks like most of the topic is years old.

Re: alternative seats that fit?

PostPosted: Sun Jun 12, 2011 7:22 pm
by lotusS2guy
Image

I'm using a pair of Corbeau seats in my Elan S2. An optional base for the Elan was available and they fit perfectly using the original clamps. I recovered them because the original cloth covering was loaded with circular metal vents which make an interesting burn pattern on your legs if the car has been out in the sun for a while.

Herb
26/4618

Re: alternative seats that fit?

PostPosted: Sun Jun 12, 2011 9:55 pm
by mark030358
IKEA do areally smart pair of leather chairs... but best for Esprits :)

Sorry could not resist...

Re: alternative seats that fit?

PostPosted: Tue Jun 14, 2011 12:45 pm
by mini64
With a little searching of the archives and manufacturer's sites, this is what I have found (havent hit the IKEA site yet):


cobra racer 7
cobra clubman
cobra imola (with trimming of outside shoulder support, also a bit tall)
kirkey 16 series (bit tall)
kirkey 47 series (bit tall and trim outside shoulder support)
sparco speed 2 (maybe fit?)
motordrive 7-type
TTR

I'm saying the seat base has to be under 19.5", width at shoulders 20inches, and anything above 33" is getting tall, especially if you put some sort of frame under it.

Re: alternative seats that fit?

PostPosted: Tue Jun 14, 2011 2:33 pm
by Old English White
What about this one !?!
Image
Dimensions (in mm):
A: External max width at shoulder = 550
B: Seat bottom to mid shoulder = 600
C: External max width at base = 490
D: Inside max width at hips = 355
E: Max height = 900
F: Base length (approx) = 470
G: Back inclination (degrees) = 75

Mass: 4.9kg!
Fully FIA tested & approved



http://www.reverie.ltd.uk/product_detai ... =R01SI0045
Christian.

Re: alternative seats that fit?

PostPosted: Wed Jun 15, 2011 3:51 pm
by batfish
Reverie seat is ?1600, Cobra 7 and the seat made by Motorseats both fit the Elan and are about the ?450 mark


regards

Andy

Re: alternative seats that fit?

PostPosted: Wed Jun 15, 2011 6:30 pm
by crannyr
We used a Kirky seat some 10 years ago. web page is http://kirkeyracing.com/index.php?link=home
Worked well but needed some work to attach to the roll cage. Prices are in the $150 up range. SCCA approved

Rick

Re: alternative seats that fit?

PostPosted: Thu Jun 16, 2011 3:28 am
by tvacc
When I was at the Bronte Park Canada car show last Sept, there was a blue Elan, highly modified with a bunch of vents in the bonnet. It had a set of Corbeau seats in it that fit great. I have tried to get in touch with the owner to get the exact model with no luck. If someone knows him, see if you can find out. Failing that, what are the exact model number of the seats in this post?





lotusS2guy wrote:Image

I'm using a pair of Corbeau seats in my Elan S2. An optional base for the Elan was available and they fit perfectly using the original clamps. I recovered them because the original cloth covering was loaded with circular metal vents which make an interesting burn pattern on your legs if the car has been out in the sun for a while.

Herb
26/4618

Re: alternative seats that fit?

PostPosted: Thu Jun 16, 2011 5:13 am
by UAB807F
They look like GT4's, especially with the description of metal eyelets. They came in either vinyl or cloth trim, both with metal eyelets, very 60s GT40 style !

http://www.corbeau-seats.co.uk/classic- ... s/gt4.html

I had a cloth-trimmed pair in my S3 elan in the late 70/80s which also had side slots for a 4-point harness. They were a tight fit and I remember squeezing the sides very slightly to get them in. They are much lighter than the original seats, very comfy and the eyelets never bothered me but I replaced them with the originals once re-trim kits started to appear on the market.

Brian

Re: alternative seats that fit?

PostPosted: Thu Jun 16, 2011 7:57 am
by Dag-Henning
I have fitted the Motordrive seat,FIA approved , and it fits like a glove....Was a bit conserned abt the height, but took the cushions out, and got nice clearence between helmet and hardtop....The latest helmets are huge (!) , but with my 174 cm it is no problem. Price is OK too.
The TTR "26R replica seat" is nothing for the track asking me....It has no head support, and is not very strong at all. Flexes in curves, and I managed to rip one in two parts in a shunt.....Dangerous! Stupit FIA rules (!) allows them though, as they class in as "original"......

Dag

Re: alternative seats that fit?

PostPosted: Thu Jun 16, 2011 7:17 pm
by gav
Hi
I am running elise seats in my road going elan - really comfy and come with head rest built in AND they clear the rear roll hoop and I am 6'1"!

In the modsports car I am building I am using the tillet carbon seat that I got cheap. Its the one where you are virtually lying down (like the Reverie one but more laid back). We fitted a frame for it so the rounded bottom is at floor level and I end up looking through the bottom of the screen.

Not sure if it will help or not but it expands the debate.

I'll try to attach a photo of the elise seats
Good luck
Gavin

Re: alternative seats that fit?

PostPosted: Sat Jun 18, 2011 4:38 pm
by toomspj
I use the Motordrive seat. It's FIA approved, they'll make it in various materials, color of your choice and fit it to your size. They'll also embroider a logo or your name etc on it.. Great service and fits perfectly!

Paul

Re: alternative seats that fit?

PostPosted: Sun Jun 19, 2011 3:46 pm
by elans4dhc
Gav,

You have a PM

Re: alternative seats that fit?

PostPosted: Wed Jun 22, 2011 11:29 am
by Andy Wiltshire
Hi,

Have a look at this. Bottom of page. A little bit more in keeping with the car.

http://andywiltshire.com/web%20site%20lotus%20page.htm

Andy

Re: alternative seats that fit?

PostPosted: Fri Jul 22, 2011 8:59 pm
by lsdweb
My seats - carbon fibre / kevlar mix. Each seat is about 1.2 kilos.

The last picture shows the mounts we've fabricated that mount to the chassis / sill bars.