Lotus Elan and Lotus Elan Plus 2 Forums

Hi,

I've fitted the TTR electronic ignition system on my +2 a month ago, everything works very well except the rev counter, so I've bought an "electronic modified" one at Speedograph Richifield.
I've have some problem to fit it, when the 3 wires are correctly connected : hearth / negative side of the coil / ignition switch, the engine won't start, there is no ignition. When I put back the former rev counter, everything is ok.

Is there here a specialist in "+2 wiring loom" (or in electronic rev counter.... )?

Thanks in advance
Jerome

The feed to the coil passes through the old rev counter, when you replaced it did you join the 2 wires together ? They are white on an Elan not sure about a plus2.

Alan.

Thanks for the answer Alan, (and thanks terry for your message)

The two wires are white on the +2, I'll try to join them together and connect the new rev counter in 'parallel'.

Jerome

Congratulations Alan - thsat was the best bit of remote diagnosis i have seen in a long while

cheers
Rohan