Page 1 of 1

wiper speed sequence

PostPosted: Sun Mar 04, 2007 1:14 am
by rdssdi
I have just completed the wiring on my +2. The wiper switch goes from park (off) position to high then to slow. is this the corrct sequence?

Bob

Re: wiper speed sequence

PostPosted: Sun Mar 04, 2007 7:03 am
by john.p.clegg
No


John :wink:

Re: wiper speed sequence

PostPosted: Sun Mar 04, 2007 4:28 pm
by Frank Howard
Bob,

Most likely, you have the rocker switch wired incorrectly. Looking at the back of the switch there should be 4 connections. They are as follows:

Top Left - White/Light Green
Top Right - Brown/Light Green
Bottom Left - Red/Light Green
Bottom Right - Blue/Light Green

Hope this helps.