Page 1 of 1

Wiring Help

PostPosted: Sun Nov 21, 2004 6:35 pm
by tonyabacus
Hi Rick if you read this again, if I tell you the little black (resistors?) things in the wires are about 3mm square and look like they have been soldered into the length of wire does that give any further clues?


ps thanks eveyone else who replied previously

Re: Wiring Help

PostPosted: Mon Nov 22, 2004 8:05 am
by flyinggellyfish
3mm , thats small . You need to test with a meter to see if current runs both ways through the black thing . If current runs both ways it is not a blocking diode . I have no other ideas then that as I am not familiar with the Elan S4 wiring .

Re: Wiring Help

PostPosted: Tue Nov 23, 2004 1:04 am
by tonyabacus
Thanks Rick I will give it a try.