Wiring Help

PostPost by: tonyabacus » Sun Nov 21, 2004 6:35 pm

Hi Rick if you read this again, if I tell you the little black (resistors?) things in the wires are about 3mm square and look like they have been soldered into the length of wire does that give any further clues?

Thanks
Tony

ps thanks eveyone else who replied previously
tonyabacus
Third Gear
Third Gear
 
Posts: 285
Joined: 16 Sep 2003

PostPost by: flyinggellyfish » Mon Nov 22, 2004 8:05 am

3mm , thats small . You need to test with a meter to see if current runs both ways through the black thing . If current runs both ways it is not a blocking diode . I have no other ideas then that as I am not familiar with the Elan S4 wiring .
Sorry
Rick
1968 Elan +2 . Now going back together after 18 years , you just can not rush these things .<br>Rick
User avatar
flyinggellyfish
Second Gear
Second Gear
 
Posts: 53
Joined: 21 Sep 2003

PostPost by: tonyabacus » Tue Nov 23, 2004 1:04 am

Thanks Rick I will give it a try.
Regards
Tony
tonyabacus
Third Gear
Third Gear
 
Posts: 285
Joined: 16 Sep 2003

Total Online:

Users browsing this forum: No registered users and 16 guests