Water temp bulb removal

[Mileso]

96D783DD-C5C0-44D0-8034-05A4E9752DE1.jpeg (85.92 KiB) Viewed 635 times

I have stolen someone else’s photo, but when I get to this stage should the bulb/capillary tube pull out with some encouragement or does something else have to be taken out. I thought I could leave the adaptor in?

[billwill]

See: viewtopic.php?t=26101&f=19&start=15#p172491
and the messages following it.

[Billmack]

Should be able to wiggle it out of there. Careful with the capillary tube. If you smell starting fluid(ether) you just lost about 200 bucks

[Elan45]

When you are able to withdraw the bulb, there is a thick washer that will usually stay on the bulb, but be careful not to lose it. It must go back in or the connection will leak.

Roger