Lotus Elan

Diff drive shaft bearing

PostPost by: milton » Wed Aug 30, 2023 2:49 pm

In the Lotus Elan Service Parts List it lists two inboard drive shaft bearings. Under RB.40 it lists 036 D 6001 and under RB.41 it lists 036 D 6017. Only one drive shaft bearing appears on the drawing. Is 6001 an earlier bearing? 6017 is the same bearing as the rear hub outer bearing, listed under DA.6 036 D 6017, but in the diagram for the differential 6017 bearing appears to have an O-ring seal. Is this also out of date, i.e. are these two bearings the same. Just checking before rebuilding the differential case.
milton
First Gear
First Gear
 
Posts: 33
Joined: 17 Aug 2016
Location: Northumberland, England

PostPost by: elanman999 » Thu Aug 31, 2023 9:04 pm

In the parts book RB40 is the drive shaft and RB41 is the bearing. I've not seen or used a bearing with an O ring on the outer but it is a 2RS bearing, I can't remember the number. It is a common size.
Cheers
John.
elanman999
Fourth Gear
Fourth Gear
 
Posts: 518
Joined: 12 Nov 2005
Location: N Yorks

PostPost by: milton » Thu Aug 31, 2023 9:27 pm

Thanks for the reply. I had a look on the Kelsport website and it confirms that the rear hub outer and drive shaft outer bearings are identical...no.6206.
milton
First Gear
First Gear
 
Posts: 33
Joined: 17 Aug 2016
Location: Northumberland, England

Total Online:

Users browsing this forum: No registered users and 4 guests