Page 1 of 1

Gearbox Clutch Slave Cylinder retractor spring?

PostPosted: Fri Jun 04, 2021 6:12 pm
by HuskerElan
Hello All;
I recently inherited a 1970 Elan S4. My Father's dream car.
Has some clutch issues, Hydraulic leak. While inspecting the slave cylinder, I noticed the retractor spring is missing.
I have the workshop manual, but there is no data for the retracting spring. See pic below. (I'm using Mark's picture from his May 2021 post) Thanks Mark.

Does anyone know how to find a replacement spring? or the dimensions of this spring, and I will have one made?
Respectfully Submitted
HuskerElan

Re: Gearbox Clutch Slave Cylinder retractor spring?

PostPosted: Fri Jun 04, 2021 11:44 pm
by 2cams70

Re: Gearbox Clutch Slave Cylinder retractor spring?

PostPosted: Sat Jun 05, 2021 12:44 am
by SENC
Since you are stateside, give Ray at RD Enterprises a call - I'd bet he has them.

Re: Gearbox Clutch Slave Cylinder retractor spring?

PostPosted: Sat Jun 05, 2021 3:43 am
by jaman
Ray has what you need. also all the bits to rebuild your clutch
rdent.com

Great guy great service great advice

Re: Gearbox Clutch Slave Cylinder retractor spring?

PostPosted: Mon Jun 07, 2021 3:18 pm
by HuskerElan
Thanks guys, I'll check them out.