Elan Plus 2 MT75 Slave Cylinder Bleeding
Posted: Sun Dec 17, 2017 2:33 pm
Hello,
So, I finally got a it more 'time off' to replace the clutch master cylinder on my Plus2 - cutting the top off the pedal box made life so much easier. New cylinder in, great. Car up on axle stands, great. Can't find the slave cylinder, strange...Tracing the hydraulic pipe it travels inside the bellhousing so a bit of online reading points me in the direction of there possibly being a concentric clutch slave cylinder somewhere in there, ideally with an external bleed nipple somewhere.
With the MT75 Spyder conversions where would the best place be to start looking for this magic hidden nipple...? I've had a good look and rummage around under there but can't find anything that obvious yet.
Any pointers welcomed
Cheers
Joe
So, I finally got a it more 'time off' to replace the clutch master cylinder on my Plus2 - cutting the top off the pedal box made life so much easier. New cylinder in, great. Car up on axle stands, great. Can't find the slave cylinder, strange...Tracing the hydraulic pipe it travels inside the bellhousing so a bit of online reading points me in the direction of there possibly being a concentric clutch slave cylinder somewhere in there, ideally with an external bleed nipple somewhere.
With the MT75 Spyder conversions where would the best place be to start looking for this magic hidden nipple...? I've had a good look and rummage around under there but can't find anything that obvious yet.
Any pointers welcomed
Cheers
Joe