Page 1 of 1

Gearbox mount for 5 speed

PostPosted: Sun Mar 09, 2014 4:21 pm
by whaig
Looking for a propshaft and a gearbox mount for 5 speed +, or can anyone explain or photos of 4 speed mount and 5 speed mount? I am UK based

Re: Gearbox mount for 5 speed

PostPosted: Sun Mar 09, 2014 7:13 pm
by john.p.clegg
You're lucky,as I have both Lotus and Spyder mountings on the bench at the moment and I'm sure I have a 4 speed in the shed somewhere....I'll photo all three of them for you in the morning..

John :wink:

Re: Gearbox mount for 5 speed

PostPosted: Sun Mar 09, 2014 7:38 pm
by john.p.clegg
Found the 5 speeds but not the 4 speed...

2014_0309gearbox0006.JPG and


2014_0309gearbox0014.JPG and


2014_0309gearbox0013.JPG and


2014_0309gearbox0012.JPG and


2014_0309gearbox0011.JPG and





John :wink:

P.S. UK based where?

Re: Gearbox mount for 5 speed

PostPosted: Sun Mar 09, 2014 11:21 pm
by rgh0
The Lotus 5 speed bracket used a different set of chassis mounting holes compared to the 4 speed Lotus bracket. My 1980 Elan Lotus replacement chassis came with both.

cheers
Rohan

Re: Gearbox mount for 5 speed

PostPosted: Mon Mar 10, 2014 10:22 am
by john.p.clegg
and last but not least,a rubbing of the frame and mountings...

Spyder
2014_0310gearboxmtg0004.JPG and

4 speed
2014_0310gearboxmtg0003.JPG and

5 speed
2014_0310gearboxmtg0002.JPG and





John :wink:

Re: Gearbox mount for 5 speed

PostPosted: Mon Mar 10, 2014 10:56 am
by rgh0
To complete the set, a couple of photos of the Spyder 4 speed 2000E gearbox mount. Note the improved details typical of Spyder - the hole in the centre so you can get at the bolt that secures the rubber mount to the gear Box and slotted rubber mount to chassis mount holes to allow for all the various tolerances affecting alignment so you don't have to distort the engine and gear box rubber mounting to bolt it in.

cheers
Rohan


Spyder 4 speed 1.JPG and


Spyder 4 speed 2.JPG and