Speedo drive
Posted:
Fri May 03, 2013 5:51 pmby William2
I have a right angle speedo drive which is missing the protruding drive peg. Is it possible to repair this by trying to remove the peg shaft from an angle drive from another classic car drive and fitting it to the Lotus drive?
Re: Speedo drive
Posted:
Fri May 03, 2013 10:20 pmby Orsom Weels
If you mean the square bit of speedo cable that goes into the gearbox speedo drive, you can get one here
http://www.caterhamparts.co.uk/product. ... oduct=2443.
Regards,Tim
Re: Speedo drive
Posted:
Sat May 04, 2013 4:48 pmby vernon.taylor
Salut William
I also bought a twill from Caterham but buggered the speedo drive trying to get the mangled bit out - well, I think it's held in by a bit of plastic and that's what I destroyed, so if it's possible to get that too that would be the way to go.
Alternatively Sue Miller will sell you one on an exchange basis for cheaper than new.
@+
Vernon
Re: Speedo drive
Posted:
Sun May 05, 2013 5:11 pmby William2
Have taken your advice and ordered a quill from Caterham cars. Thanks for your help.