Page 1 of 1

Depth of 4 speed bellhousing

PostPosted: Wed Jan 04, 2012 9:17 pm
by worzel

Lots of apologies for asking this again but I've lost the info.

Can any obliging owner let me know how deep the cast iron bellhousing is for a four speed elan plus-if possible-

how far the input shaft protrudes from the front of the four speed box (160mm I think from memory)

how far from the front case of the box the splines begin (85mm from memory)

how long the splined section is (I assume it's the same as a Type 9 ie 43mm)

Many thanks for your trouble.


Re: Depth of 4 speed bellhousing

PostPosted: Thu Jan 05, 2012 9:50 am
by john.p.clegg

Does this help ( again)


John :wink: