Page 2 of 2

Re: 4 speed gearbox output shaft

PostPosted: Mon Jan 16, 2017 2:52 pm
by Orsom Weels
Hi Rich,
I somehow missed your initial January 10th follow up, but looking at your photo's it does look like your propshaft is too far into the gearbox. Is that photo (the lower of the two) taken with the propshaft still bolted up to the diff? If that is indeed the gearbox splined output shaft protruding through UJ yoke, it will almost certainly push the welsh plug out again if the propshaft is pushed in that far again.

Regards, Tim